One Handed Xbox Series X/S Clip-on Attachments (Left Hand)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The print comes in many parts that will need to be clipped together.
Print settings - (Bambu P1S)
Material - Body needs to be PETG because the center section should allow for some flexibilty. PLA wears too quickly. The button extenders should be PLA+ or PLA Pro as PETG is too flexible for those.
Supports - yes (original auto) and the default orientation is correct for best print quality
Set the Threshold angle for the supports to 50% when printing the button extenders. Otherwise, the support will not print underneath the part that touches the button.
Layer height - 0.2 mm
Infill - 20%
Instagram: https://www.instagram.com/criticallayer3d/
Youtube: https://www.youtube.com/@CriticalLayer3D/shorts
If you would like to purchase one from me:
Or
https://www.ebay.com/itm/146724666061
Install Guide: