1 / 2
2x flush cutter magnetic holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Magnetic holder/stand for 2x CHP-170 flush cutter (other ones will probably work too)
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 7
- Makes
- 0
- Views
- 90
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Magnetic holder/stand for 2x CHP-170 flush cutter (other ones will probably work too)
Uses 4x 6mmx3mm neodymium magnets to hold it securely to a surface, they are press fit on the bottom of the model. You could probably use some sort of adhesive if you want to use it on a nonmagnetic surface - I don't think it would work on its own though unless you found a way to weigh it down.
Pretty much any material/print settings will work - I used “0.3mm DRAFT” preset in prusaslicer