Irrigation Emitter Cap (for Temu version and lower water flow & holes)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cap fitting to irrigation system from Temu with lower water flow and angle of streams + different amount of holes.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 39
- Makes
- 0
- Views
- 242
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution
Original caps had high water flow (there are 8 bigger holes) so the preasure with increasing amount of caps was rapidly dropping. I found out similar cap but still not fitting well in my case so I modified it:
- cap size, thread and inside parts for fitting to irrigation system from Temu
- plus additional versions - different holes (amount, angle of stream 0-45°) to cover the different needs I had.
Size of the holes is 1mm so afterwards if needed bigger it is easy to drill it. But for me it is OK and it is not loosing water preasure so much as original from Temu.
If you need different holes, I added also blank cap, so you can easily modify it.