Extruder mod with lever for Q1pro\Мод экструдера с рычагом для Q1pro
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Extruder mod with lever for Q1pro\Мод экструдера с рычагом для Q1pro
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 13
- Makes
- 0
- Views
- 126
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Mod feeder with a lever, I didn't want to damage the original parts or cut anything out of them, so I modeled new ones. Additionally, the arichva has a second part of the feeder that the manufacturer doesn't provide, so you'll need to print it yourself. I printed it using ABS-GF5, and the size of the soldered bushings is M3, with a length of 4 and a fit size of 4 (the original size may be 5, but it's not certain). I used a regular soldering iron to solder them.
Мод фидер с рычагом, родные детали портитить и вырезать в них что то не стал смоделировал новые, также в арихвах присутствует вторая часть фидера которую производитель не даёт , из чего печатать смотрите сами, я печатал из ABS-GF5, типоразмер вплавляемых втулок резьба м3, длина 4, размер под посадку 4(в оригинале последний размер возможно 5 ,но это не точно), вплавлял паяльником обычным жалом.