1 / 1
Monstera Pipe Plant Decoration
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Decorative leaves for attaching to pipes using magnets.
- Rating
- 0 / 5
- Likes
- 29
- Downloads
- 74
- Makes
- 0
- Views
- 377
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Public Domain
These are decorative Monstera leaves that need to be finished by heatforming by hand after printing. Meant to be stuck onto pipes by magnets or glue, but not limited to that. If you need a flat mounting surface, use cut function in slicer to flatten the end by removing the cylindrical mounting face.
Print instructions:
Print without supports, use PLA for easy heatforming.
Hardware required:
- Magnets ø8x7mm or stack of thin magnets ø8. They can be even smaller, you can wrap them in tape to fit them tightly and as long as they stay put in the hole, it's fine.
- Hairdryer to form the leaves. You can use printbed, but hairdryer is better.
Support
All my work is free and in the public domain when possible. If you find it valuable, you can support me on Ko-fi. 