Herringbone Eccentric cycloidal fidget model (bigger knob)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Same as the parent print, but with a bigger knob, and a second knob on the plug side.
- Rating
- 5 / 5
- Likes
- 22
- Downloads
- 82
- Makes
- 3
- Views
- 1,071
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Public Domain
Thanks Aviv for the neat fidget toy. Print everything in the parent print, except the “pinion knob” and the "pinion bearing support plug". This remix replaces those two files.
This remix adds a bigger knob for the pinion gear (+20% diameter, +50% height))
It also adds a second knob to replace the original pinion gear cap. This is optional if you want it. Use an M3 nut in the plug knob, and an M3x40 bolt (the M3x30 from the base print will probably work).
Secure the nut to the small end of the plug knob, thread the M3 bolt until tight. Use a hex wrench and grip the knob to tighten. Then screw the bolt/knob combo into the pinion gear as normal.