1 / 2
Endcaps for Cardboard Tube
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I needed storage for some carbon fiber rods. These caps were made for the cardboard tube I had.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 12
- Makes
- 0
- Views
- 48
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Public Domain
I needed a storage container for some carbon rods I bought, and the easy solution was to print end caps for a cardboard tube I had. After cutting the tube to the length I needed I inserted the caps in the ends. I made the bottom cap flush but I made the top cap with an offset in so it was easier to remove. I used super glue one the bottom cap so it would not come out. Step files so you can scale to what ever size you may need.