RainPoint ITV405-DLS Water Timer Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A mount for the RainPoint ITV405-DLS 4 zone hose water timer for home irrigation
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 25
- Makes
- 0
- Views
- 138
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution
This is a mount for the RainPoint ITV405-DLS timer. I wasn't able to mount the timer directly to the faucet head, because my faucet was too low to the ground. This mount allowed me to attach the timer to a hose and mount it remotely.
A cable tie, in addition to the screws that come with the timer, are used to attach the timer to the mount. After printing, the m3 mounting screws will need to be punched through a thin layer in the bolt holes. Three screws/bolts will also be needed to attach the mount to a wall or post.
For the mounting screws, it's recommended to use a washer under the screw/bolt head, to spread the load.
Print Settings
These settings works for me using PETG:
.2mm layer height, .44mm layer width
No supports
6 walls
6 top and bottom layers
20% grid infill
Estimated PETG filament use: 52g