Elegoo Centauri Carbon runout sensor PTFE adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Allows you to click a PTFE tube in to the runout sensor on the Elegoo Centauri Carbon via PC4-M6 or PC4-M10 adapter.
- Rating
- 3.75 / 5
- Likes
- 108
- Downloads
- 764
- Makes
- 4
- Views
- 3,183
- Reviews
- 8
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
Clicks onto the runout sensor and holds a PTFE adapter.
No disassembly of the runout sensor, connect your drybox via PTFE tube for those moisture sensitive filaments.
Versions available for PC4-M6 and PC4-M10 adapters.
UPDATE 19-09-2025: (Per request) Versions available for extended mount, inside width 22 mm.
Be careful when you screw in the adapter, the pressure can crack the plastic. Either ream the hole with a 5.5mm (PC4-M6) or 9.5mm (PC4-M10) drill bit, or tap the hole with an M6 or M10 tap.
It can be necessary to twist the filament when you insert it, to hit the hole in the runout sensor.