Cookie Cutter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cookie cutter with three hearts, three miscellaneous shapes, and one star, based on a broken model out of the 70s
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 14
- Makes
- 0
- Views
- 57
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
Rafts/Brim: Brim 5 mm
Supports: No
Resolution: 0.4 mm Nozzle, Variable Layer Height: Adaptive Quality/Speed 0.5
I used a steel nozzle as of food safety.
Infill: 35%
The AusdrückForm.stl is a little bit smaller than the AusdrückForm_V3.stl.
The orange part was printed in ASA (ABS would also work) and vapor-smoothed using acetone for about 25 minutes, without any sanding beforehand.
Note: Some food-safe ABS materials are available, but please do your own research and take necessary precautions.
Overall consider using FDA certified material for this.
The white part was printed with translucent PCTG. I did not tried post-processing by sealing with epoxy. But i got feedback that this print/material survived the dishwasher.