1 / 3
Bambu Lab Filament Spool Switcher & Winder - Crank arm and gear with screw lock
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
To avoid the crank arm slip out of the winder spool holder with bearings I added a screw lock
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 43
- Makes
- 0
- Views
- 277
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
To prevent the crank arm from slipping out of the hex hole, I attached a collar with a screw lock to the gear. The crank arm has a corresponding hole. Unlike the original gear, the spacer is seperate and must be inserted between the gear and the ball bearing.