Wheelchair Cell Cradle
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€6.68 – €8.17 net (excluding VAT)
For file: Cell_Phone_Holder_WheelChair_0.2mm_ABS_MK3S_7h16m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €7.43 excluding VAT (range midpoint).
- Weight reported by the author
- 70 g
- Print time reported by the author
- 7.26 hr
- Source material
- ABS
- Estimate material
- ABS
- Estimate printer
- Bambu Lab X1 Carbon - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Cell cradle attached to wheelchair for wireless charging.
- Rating
- 5 / 5
- Likes
- 33
- Downloads
- 79
- Makes
- 0
- Views
- 1,002
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Public Domain
Wheelchair Cell Cradle
Designed for disabled veteran with limited mobility and dexterity.
Cell phone rests in cradle, where it is wirelessly charged through a charging puck affixed to the back. Power to the wireless puck is provided by the wheelchair's main battery.
Cradle is attached to the main frame of the wheelchair with self-taping, countersunk screws.
The design allows for the user to pull mobile phone out with limited effort. (slot in center is intentional, such can be lifted with just one finger)
Slots on either side would allow for use of corded charger if need be.
- Material: ABS
(Recommend to use enclosure to prevent warping) - Infill: 20%
(Infill Pattern: Adaptive Cubic) - .2mm layer height
- Bed Temp: 110c
- Nozzle Temp: 255c