1 / 1
Whelen LIN3 emergency light windshield housing — image 1

Whelen LIN3 emergency light windshield housing

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a housing for the LIN3 LED emergency lights for your windshield

Rating
0 / 5
Likes
6
Downloads
22
Makes
0
Views
225
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Public Domain

This model is a housing for the Whelen LIN3 emergency lights and its designed for an F150 and uses double sided tape to stick to the upper portion of the windshield. There is minimal flashback inside the cab and uses a 35 degree angle to keep the lighting level. It utilizes 2 6-32x1/2 inch long machine screws to secure the light in the housing. This housing is not big enough for the bezel to be mounted with it. I used PETG with normal supports and printed this model flat on its base. You will have to rough up the area for the double sided tape for better adhesion. I used an Ender 3 V3 SE to make this model.

Tags