1 / 2
Grill fork holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€8.27 – €10.11 net (excluding VAT)
For file: Grill_fork_ holder_PLA_9h29m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €9.19 excluding VAT (range midpoint).
- Weight reported by the author
- 109 g
- Print time reported by the author
- 9.48 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Wall bracket. Mounting with 4 screws. Držák na stěnu. Montáž pomocí 4 vrutů.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 16
- Makes
- 0
- Views
- 148
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Share Alike
- Double wall bracket. The thickness of the mounting gap is 5 mm. The diameter of the mounting holes is 4mm i use 3,5mm. Printed from PLA on Anycubic Vyper using supports.
- Dvojitý držák pro přivrtání na stěnu pomocí 4. vrutů o max pr.4mm. Mezera pro vsunutí vidlic je 5mm. Tisknuto tak jak by měl viset na stěně. Použití podpor je nutné.