1 / 2
Tiffin RV Pantry Divider
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Divider to keep tall items upright in narrow RV pantry
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 19
- Makes
- 0
- Views
- 244
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
These dividers keep tall items upright in the narrow sliding pantry found in some Tiffin RVs. The dividers, which are 4 in. wide and 6 in. tall, prevent items from falling over or hitting one another while driving. A 1/2 in. x 1/8 in. aluminum bar is held in place against the pantry sides to prevent items from falling out when the pantry is opened. It's easy to remove and replace bottles, even at the ends.
The parts were printed in PLA at 0.2mm structural and default slicer settings. Supports are only needed for the side slot, which holds the aluminum bar.