1 / 5
Squid Game cookies first layer and Z-Offset Test
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Quick Z-offset Calibration and first layer Test
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 22
- Makes
- 0
- Views
- 70
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution
When printing with a 0.2mm nozzle, I encountered the fact that I needed to very accurately adjust the Z offset with a first layer thickness of 0.1mm, and the paper test gave too rough a result. The essence of the test: with the correct offset, the central part should separate, while the layer should be continuous. To use the test correctly, you need to make sure that the flow rate is set correctly.
Print parameters:
First layer height = nozzle diameter / 2;
Elephant foot compensation if needed = nozzle diameter/4;
Line width = nozzle diameter;