PRAKI Cereal Container Dry Box Hygrometer Remix
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€5.22 – €6.38 net (excluding VAT)
For file: Upside-Down Cereal Dry Box Remix All Parts_0.4n_0.2mm_PLA_COREONE_3h58m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €5.80 excluding VAT (range midpoint).
- Weight reported by the author
- 111 g
- Print time reported by the author
- 3.96 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Hygrometer added and new desiccant cover
- Rating
- 5 / 5
- Likes
- 16
- Downloads
- 138
- Makes
- 1
- Views
- 1,017
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
No hardware besides the 608 bearings and PC4-10 fittings. No drilling required.
This is the same as the original, except adding a stand for a hygrometer and a different design for the desiccant cover that prints much faster (7 min vs 18 min on CORE One 0.2mm speed).
I've also included a project file that has all the printed parts together on a single plate with the required custom supports on the bottom frame. Total is ~4 hour print time with PLA on CORE One 0.2mm SPEED profile.
There is also a file that is just the hygrometer stand for retrofitting existing makes of the original. Use CA glue to adhere it to the frame.
Fits commonly found hygrometers e.g. https://www.amazon.com/dp/B07MCGDN5C