Multifunctional Mechanical Tarp Clip

Multifunctional Mechanical Tarp Clip

• Durable Mechanical Tarp Clip for various usecases
• 3 parts + prefered eyelet
• Easily detachable supports
• Prints uder one hour (slow printing)
• Locks itself when closed

Common Uses:

• Securing tarps, tents, rain covers, and outdoor shades
• Fastening fabric or mesh without damaging it
• Hanging decorations or plants
• Temporary clothing clips - for ID tags, gloves, tools, or flashlights
• Mounting LED strips or fairy lights to fabrics or nets
• Suspenders (braces) - attaches firmly to pants or belts
• Pacifier holder - safe way to attach baby pacifiers via string
• Sewing and tailoring aid - hold fabrics together during stitching
• Quick DIY clamps for workshop or repairs
• Curtains clip

Print instructions:

• Import as ONE object and as a Project (Two parts already have Support Enforce)
• 100% infill, 0.10mm and slow print
• You can use any non-flexible filament, but I would reccomend PLA or PETG

Assembly guide:

1. Clean all parts from printing shortcomings
2. Redrill holes and eyelet socket with 3mm drill bit (or clean them)
3. First, put lever part into the lower holes, set it in open position
4. Gently put top part over the lever part (like lego)
5. Now slowly push lever part down into closed position while pushing top part into upper holes.
6. If they won't fit on first try, try wobbling with it until it snaps into the holes.
7. As it snaps, everything is secure and won't fall apart easily.
8. Eyelet goes straight into its socket on the end of the clip (shorter side if using flat eyelet)

Additional informations:

• Eyelet is 2.8mm in diameter