Beer Stein Can Holder

Can holder for 12 oz. (355mL) cans.

Prusa Slicer is perfect for adding your own text or graphics (svg).
I included a plain one for customizing and one that I added an svg as an example.

There is also a plain lid for customizing and one that is more like a traditional beer stein.

The walls are hollow for insulation and it cuts down on the print time and used filament.

I used an M3x20 screw and M3 nut I had left over from Prusa builds for the hinge.  I would recommend using a nylock nut so it won't loosen over time.

I used an M3x6 screw to set the nut fully in place.  M3x8 should also work.  You just have to put the screw in between the gap in the hinge and then tighten until the nut is fully seated.  Do not attempt to do it with the M3x20 screw or you will crack the lid hinge.

After the nut is set and you put the 2 together, do not overtighten.  You can crack the hinge or it won't move freely.
 

Edit:  I updated the plain lid to v2 and added a fancy lid.