Small plant runoff collector
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stand to make collecting runoff when watering plants easy, for measuring EC
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 7
- Makes
- 0
- Views
- 53
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Share Alike
This is a stand for small plant pots. It has a small rectangular reservoir, into which you can stick an EC probe. The reservoir is just barely big enough for my EC probe ("ISPRING Advanced Digital TDS Meter"), requiring the minimum amount of water.
The model is parameterized, so can easily be adjusted for other sizes of EC probes. The reservoir is 15mm x 27.5mm, and 35mm tall. The inside diameter of the catch pan is 120mm/~4.5". I've used it tiny 2" square nursery pots, up to 4" round. The catch pan has a slight angle (5°), so that the water collects in the reservoir. There are small risers which form a flat plane above it.
The “cavity modifier” model is just a cylinder. I've had issues with other prints with flat bottoms suctioning to flat surfaces (like countertops) when wet. I added this to the slicer as a modifier mesh, and set no bottom layers. I used honeycomb infill at 10%.