1 / 3
Undersized Freewheel Remover
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A slightly undersize freewheel remover (similar to a Park Tool FR-1.3) with 12mm clearance hole.
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 61
- Makes
- 0
- Views
- 335
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
I was trying to remove a Kangyue freewheel, and my Park Tool FR-1.3 didn't fit (just barely). So this one has slightly deeper spline cut outs and a tighter overall fit to minimize rounding over the printed tool when used with a 1" / 25.4mm socket or wrench. I was surprised it didn't break, even when with using a cheater bar. I hope this helps someone else out in a pinch.
Printing Tips:
- Use PLA
- 0.12mm layer height
- 6 walls / 100% infill
- No cooling (to maximize layer adhesion)
- You may need to scale or adjust horizontal expansion. On my X1C and the filament I used my printed part was ~0.3mm smaller than the model.