fishtechy proft ball
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A 1:1 replica of the Fishtecky Proftball, designed to avoid paying €35 for cheap plastic. Pre-modeled rope hole 4-5mm
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 17
- Makes
- 0
- Views
- 46
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
3D-Printed Fishtechy Proft Ball – DIY Version
Save money! No need to pay €35 for two plastic balls—just print and paint them to match the original.
Printing Instructions:
✅ Recommended Material: ASA or PETG
✅ Infill: 15-20% (for a good balance of strength and weight)
✅ Supports: YES (necessary for the curved underside of the ball)
Type: Tree supports (less material waste) or normal zigzag
Overhang Threshold: 50–55° (helps reduce support blobs)
✅ Layer Height: 0.2mm for smoothness (or 0.3mm for faster printing)
✅ Brim/Raft: Optional (helps with bed adhesion if needed)
Post-Processing:
🔹 Sanding: Lightly sand for a smoother finish before painting.
🔹 Painting: Use matte or semi-gloss spray paint to match the original Fishtechy colors (likely white/orange or other bright tones).
🔹 Rope Attachment: Insert a 4-5mm rope through the pre-modeled hole—secure with a knot or a drop of glue if needed.