1 / 5
Fortune and Glory - cumstom board game coins — image 1
1 / 5

Fortune and Glory - cumstom board game coins

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Custom coins for board game "Fortune" and "Glory", each in values 1 and 5.

Rating
0 / 5
Likes
6
Downloads
18
Makes
0
Views
148
Reviews
0

Updated at source:

Model information

Category
Board Games
License
Creative Commons — Public Domain

Dear fellow makers,

These are custome "Fortune" and "Glory" game coins, each in values 1 and 5.
I have printed them slightly bigger than the the cardboard punch-out coins that come with the game - 30mm diameter for the 1-value coins (vs. 26mm of original cardboard), and 40mm diameter for the 5-value coins (vs. 37mm of original cardboard).
For each coin, print the STL twice and glue the halves together for a 3,6mm thick coin.

This is a remix of "Azteken-Goldmünze" by idealoding:
https://makerworld.com/de/models/96087-aztec-gold-coin?from=search#profileId-103742

---
Attention:
The coin desings are 82,55 mm in diameter - you need to scale them down in the slicer!
Select 30mm diameter for the 1-value coin, and 40mm diameter for the 5-value coin. Both coins - once assembled - will then be 3,6mm thick.

Print quality: Fine-0,12mm (coins in fotos); I suggest Fast-0.2mm - they look almost just as good but this saves you a lot of printing time

---
Post-processing: Assembly and Washing
After print, glue the halves together (superglue or UHU Kraft).
I've used Vallejo wash "Umber Wash (73.203)" for the gold Fortune coins and "Blue Wash (73.207)" for the blue Glory coins.

I hope you like the coins!

Best wishes from Munich

Tags