1 / 3
Prusawire Cable Management Mods
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I'm allergic to zip-ties xD
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 26
- Makes
- 0
- Views
- 494
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- GNU General Public License v3.0
Collection of cable management mods for Prusawire. I will add more models for cable management as my Prusawire build progresses.
FAQ
PSU and Z-motor cable guide:
PSU wire spacing is designed with black Prusa PSU in mind. Holes are 3,6 mm in diameter with center to center distance of 10 mm. Hole for Z-motor cable is 4,4 mm in diameter.
Required hardware
- 2 x M3 T-nut for 3030 extrusion, printable version if metal T-nuts are hard to find
- 2x M3x10 SHCS
X and Z-motor cable clips:
Designed to hold X and Z-motor cables in the little frame cutouts. Be careful when inserting heat set inserts as there is quite a thin wall around the hole. I recommend using heat set insert press.
Required hardware:
- 3 x M3x16 SHCS
- 3 x M3 Threaded Insert - M3x5x4 (Voron spec)