Silicone Nozzle Brush (stick)
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€2.51 – €3.07 net (excluding VAT)
For file: Silicone_Finger_Brush_v2_sliced_0.4n_0.2mm_PCTG_MK4IS_3h23m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.79 excluding VAT (range midpoint).
- Weight reported by the author
- 24 g
- Print time reported by the author
- 3.39 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Silicone Nozzle Brush (stick)
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 6
- Makes
- 2
- Views
- 125
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
Silicone Nozzle Brush (stick)
I wanted a way I could hand clean the nozzle when hot on my printer.
This works great.
I used a silicone finger cot that has a brush. I pull it up over this 3d printed board and now I can brush my hot printer nozzle. Very gently of course.
I have worn this silicone finger cot on my pinky and brushed my 3d printer nozzle, but my I am not a contortionist. So I designed this finger board below. It simulates a flattened out finger.
This silicone has survived up to 270deg C (3D Fuel PRO-PCTG high end temp). I have not tried it any hotter, but it should work.
