1 / 4
SDV180-1 Rodent/Bug Cap
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cap for SDV180-1 Hammond rainproof ventilator, small, polycarbonate, pressure compensation.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 33
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
Needed a cap to friction fit over these vents I got for a meshtastic battery enclosure.
Use M2x12 screws to lock the top to the bottom, ( sandwiching aluminum mesh to the other half. )
The two additional holes are to use metal wire to lock the cap around the vent.
Printed and test fitted in PETG.
https://www.automationdirect.com/adc/shopping/catalog/enclosure_thermal_management_-a-_lights/breathers_-a-_drains/sdv180-1
https://www.amazon.com/dp/B0CZS6X7DJ