Dutch Row House
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.18 – €0.23 net (excluding VAT)
For file: WindowsAssembly2_0.2mm_PLA_MK3S_17m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.21 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 16.8 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Dutch row house featured on the Stroopwafels box. Roughly 1∶160 scale to a real building.
- Rating
- 0 / 5
- Likes
- 24
- Downloads
- 89
- Makes
- 1
- Views
- 581
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial
I modeled one of the Dutch row houses featured on the Stroopwafels box. The model is the same size as the picture on the box and roughly 1∶160 scale to a real building. To create the model follow the steps below:
- Print the windows. If they are not printing well try scaling up the size of the model.
- Print the top and make sure to enable supports for this piece.
- Print the front. To get the best surface finish make sure there are one or two layers of infill.
- Print the back.
- Superglue the windows (except for the top one) onto the front of the building.
- Superglue the front to the back of the building.
- Superglue the top onto the back/front.
- Superglue the top set of windows onto the top/front.
This model was printed on an Anycubic Mega Zero 2.0 with a 0.4 mm nozzle in HATCHBOX PLA filament.
Note: the windows can be difficult to print, make sure the print bed is level and has good adhesion.