Core One side bin / Core One Seitenbehälter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Side storage bin, which is attached exclusively with screws
- Rating
- 4.909 / 5
- Likes
- 62
- Downloads
- 185
- Makes
- 11
- Views
- 1,254
- Reviews
- 11
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Side storage bin, which is attached exclusively with screws.
Complements my tool holder.
https://www.printables.com/model/1368747-tool-holder-for-the-left-side-of-the-core-one
Two M3 x 5 screws plus hex nuts are required to assemble the two individual parts. Two additional M3 x 8 screws and nuts are required for mounting on the Core One. Printed in Prusament PETG with 15% infill and 0,2mm.
I do not allow any commercial use of the design or parts of it.
----------------------------------------------------------------------------------------------------------
Seitenbehälter, welcher ausschließlich über Schrauben befestigt wird.
Ergänzend zu meinem Werkzeughalter.
https://www.printables.com/model/1368747-tool-holder-for-the-left-side-of-the-core-one
Für die Montage der beiden Einzelteile sind zwei M3 x 5 Schrauben plus Sechskantmutter erforderlich. Zwei weitere M3 x 8 Schrauben und Muttern sind für die Montage am Core One erforderlich. Gedruckt in Prusament PETG mit 15% Infill uns 0,2mm.
Ich schließe hiermit nochmals alle kommerzielle Nutzung des Designs und/oder Teilen davon ausdrücklich aus.