1 / 23
Bike stand adjustable 25-51 mm (all parts printed) — image 1
1 / 23

Bike stand adjustable 25-51 mm (all parts printed)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Bike stand with only printed parts. Wanted to learn and apply some design concepts, so some may say it's overengineered.

Rating
4.667 / 5
Likes
333
Downloads
1,096
Makes
6
Views
8,347
Reviews
6

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Adjustable bike stand for tire width 25-51mm. All required parts are printed.
Tested with gravel bike with 29" wheel 45 mm tire width. Bike weight around 11 kg. 

This is the first version of this bike stand. The bike is stored in a garage with stable temperature, humidity, and no sunlight, and after two months of use, I've yet to see any wear and tear. I used PLA for this print, but I plan to try PETG if it fails. 

Print settings: 
Big parts - 0.28 mm Extra draft in Bambu Studio - 0.28 mm layer height, 2 perimeter, PLA
Small parts - 0.20 mm Standard in Bambu Studio - 0.20 mm layer height, 2 perimeter, PLA

Design comments:

This project was a nice opportunity to learn new tricks within the 3D-printing world, and I'm happy with a design where all parts are printed.  

Bolt assembly:

Locking assembly shown on test prints:

Possible future works: 

  • Redesign for use with steel M8 bolt and nut.
  • Make bolt caps easier to use as they are a bit small and does not offer a comfortable grip. Not a big problem if you don't need to adjust the bike stand regularly. 

I'd love to hear your feedback :)

28.08.25: Got some feedback about the model being too big for Prusa MK3.5-MK4.0. I'm working on splitting the big parts so it can fit smaller print beds. 

Part list
PartQty
Stand_A1
Stand_A_mirrored1
Stand_B1
Stand_B_mirrored1
Support_A2
Support_B2
Pin12
  
Bolt_body_A4
Bolt_body_B4
Bolt_head4

Tags