Krups Duothek drip stop spare part
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Spare part for Krups Duothek drip stop mechanism
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 5
- Makes
- 0
- Views
- 34
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Spare part for drip stop mechanism of Krups Duothek brand coffee maker.
Original model found at thingiverse. I found the original model very difficult to print. This model is split in two - the thin end hook is separated and can be printed stronger placed sideways on the flat side, and the main part can be printed flat horizontally. This should make the part easier to print. At least this worked for me.
Print flat sides down, then insert together all the way until flush at edge.
I have not made any actual modeling here, I just split the model for easy printing. Please credit original maker here: https://www.thingiverse.com/thing:229669
These worked for me:
- PETG
- Supports where the small hook is inserted, on plate only
These leave small flat overhangs only, and the supports came off easily. Nothing that my MK4S can't handle. Just make sure the slicer bridges the overhangs the short way (from side to side), and not on top of empty space (long way end to end).