1 / 6
Filament Tipper #3 (Best Soft Tip of Filament for MMU2/MMU3/ERCF/etc.) — image 1
1 / 6

Filament Tipper #3 (Best Soft Tip of Filament for MMU2/MMU3/ERCF/etc.)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Don't you experience PITA when the filament is manually pushed through PTFE tube and get stuck in the end maybe kinked?

Rating
5 / 5
Likes
14
Downloads
51
Makes
3
Views
354
Reviews
4

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Noncommercial — Share Alike

Edit 07-Aug-2025: Bottom Nut renewed, needed to be mirrored.

After two good solutions I have now the best solution ever. Contrary to my first trials with two cutter blades I have doubled the blades now. It is four instead of two. This resulst in a much smoother grinding process, and it works with half of revolutions with much better tip. 

System consists of 6 (resp. 10) stl files:

  1. Quarter 1 (main part and number 1 for MMU)
  2. Quarter 2 (main part and number 2 for MMU)
  3. Quarter 3 (main part and number 3 for MMU)
  4. Quarter 4 (main part and number 4 for MMU)
  5. Top Nut Ring
  6. Bottom Nut Ring

You also can print quarters 1 through 4 without the numbers, then the adequate number is indent of 0.6mm. Up to you!

We need the four quarters as they are different in regard to the thread. Clockwise 1-2-3-4 will form a complete thread for Upper and Lower Nut.

Note that Upper Nut is 2mm lower than Lower Nut! Upper nut has declining inner diameter to tighten the Quarters together. Lower Nut has only an opening after the thread.

What else you need is four Neodym magnets ø3x2mm, some superglue for them and four break-offs of a standard cutting blade. Size 9mm, fragment 4.5mm. Standard!

Designed with TinkerCad, printed on my MK4 in PLA, PETG would also work fine. I used some support (grid) for the parts, but this turned out removing like a charme Thanks to Prusa.

Once you need to push that much filament through the tubes, why not using a motorized filament feeder instead of your fingers. Make life easy! Here the feeder: https://www.printables.com/model/1367576-liion-18650-filament-feeder-for-bowden-loading-ext/comments/2775938 

Enjoy and happy printing.

Explore my other Printables: https://www.printables.com/de/@Tritschi 

Tags