1 / 7
Superior Spray Can Pro Holder V2 Ergonomic | M3 or M4 — image 1
1 / 7

Superior Spray Can Pro Holder V2 Ergonomic | M3 or M4

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

An ergonomic, two-part 3D-printable spray-can holder that transforms any aerosol can into a comfortable gun

Rating
0 / 5
Likes
5
Downloads
11
Makes
0
Views
101
Reviews
0

Updated at source:

Model information

Category
Tools
License
Standard Digital File License

Superior Spray Can Pro Holder V2
Ergonomic 2-Part STL Model for Effortless, Precise Spraying

📹 Demo

Watch it in action: https://www.youtube.com/shorts/22QJdDvJ1J8

Overview

The Superior Spray Can Pro Holder V2 turns any standard aerosol can into a comfortable, trigger-style spray gun. Redesigned from the ground up for real-world use, it maximizes ergonomics, strength and precision—no supports required on your FDM printer.

🎯 Key Features

Two-Part, Support-Free Print

Main clamp and trigger released separately

Lightweight shell-style infill (< 30 g)

Clean, modern lines—no blocky “Minecraft” aesthetic

Ergonomic Comfort

Contoured handle for all-day use

Smooth, responsive trigger action—zero jamming

Generous space between grip and trigger for a stable two-point hold

Precision Spraying

Integrated crosshair aligns perfectly with the nozzle

Rock-solid fit—no wobble or shift

Optional M3/M4 screw mount for extra security

Built-In Strength

Reinforced geometry resists bending or flex

Optimized screw-mount position for even force distribution

Efficient material usage—strong yet economical

🖨 What’s Included

SPRAY_GUN_SUPERIOR_V2.stl

SPRAY_TRIGGER_SUPERIOR_V2.stl

🔩 Hardware & Assembly

Required: 1× M4 screw + nut (attach trigger)

Optional: 1× M3 screw + nut + washer (extra clamp lock)

Clamp holds tight—no hardware needed unless you prefer it

Note: This is not a print-in-place design. Trigger installs post-print.

⚙ Recommended Print Settings

Nozzle / ModeInfillWallsLayer HeightTimeMaterial
0.6 mm, Gyroid (Balanced)30 %20.20 mm~1 h 40 min~58.6 g PLA
0.4 mm, High-Detail Showcase30 %20.08 mm~8 h 20 min~57 g PLA

 

Lightweight Variants

0.4 mm, 15 % infill, 1 wall → ~2 h 40 min, 38 g PLA

0.6 mm, 15 % infill, 1 wall → ~1 h 30 min, 46 g PLA

0.6 mm @ 0.30 mm (Bambu Lab “Strength” preset) → ~1 h 45 min, 63 g PLA

Tip: Use 0.12–0.16 mm layer height for overhang-free, clean prints.

🔥 Material & Settings

Tested: PLA (225 °C nozzle / 45 °C bed; first layer 235 °C / 60 °C)

Recommended for Strength: PET-G or ABS

Pro Tip: Stronger filaments allow even thinner walls & lower infill

I'm sharing this project only for PERSONAL USE!
If you want to sell it, we need to talk about licensing this…

If you have found that project good, here is a page where you can buy me a coffee and vote on what i will do next: https://ko-fi.com/thesunshinedude


Or just drop a like on my artstation: 
https://www.artstation.com/lukasz_kiebala

Support and request:
[email protected]
https://discord.gg/6NKQtxDTGQ

Best regards, Sunshine

Tags