1 / 1
Eufy S340 pole mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple clamp mount for a Eufy S340 camera onto either a 2" or 100mm pole.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 61
- Makes
- 0
- Views
- 404
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
If the mount is exposed to lots of direct sunlight, definitely do not use PLA. Use ASA if your printer supports it, otherwise use PETG.
Two versions, one with inside diameter of 55.6mm (2") and another with 99mm (for a 100mm pipe). Holes are 3mm so #4 wood screw works fine - 2 screws to attach the back to the front, and 3 screws to attach the factory camera bracket to the front. The hole openings in the back part are 7mm so make sure the screw's head size is smaller than that.
Master is here: Eufy S340 pole mount by notrslau - Thingiverse