Fidget: Blumotion cliker
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hand holder for blumotion for doors
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 36
- Makes
- 0
- Views
- 412
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial
Blumotion fidget just to hold and click :-)
Uses a blumotion for doors 970.1002.
Blumotion – soft close mechanism from Blum® (furniture hardware company). Esentialy it's a gas dempfer that solf close drawer slides or any other soft clode hardware uses. This exact one is made for cheap hinges that don't have integrated soft close mechanism. You can buy it from your local Blum dealer around the world. Avg price – €1.5
Technical documentation for blumotion: https://publications.blum.com/2024/catalogue/en/186/
This exact one I used is for installing on a handle side. There is also a different one to install from the hinges side. The one I used is softer and feels better, but that's a personal preference.
Blumotion itself has a lip on top. Normaly additional hole isn't drilled, so it isn't completely flush with the cabinet wall. In my model I added a lip to make blumotion sit completely flush.
I used fuzzy skin including top layer using TT's method
to make a model mode attractive to touch. Personal preference.
.f3d file included, so you can change hole dimentrions to suit your printer. All the dimentions are in main_pipe_profile sketch.