BTT Octopus DIN rail mount with fan option
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount for the BigTreeTech Octopus V1.1 board using a DIN rail. Options for 92mm and 120mm fan.
- Rating
- 4.8 / 5
- Likes
- 119
- Downloads
- 1,238
- Makes
- 6
- Views
- 5,680
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Mount for the BigTreeTech Octopus V1.1 board using a DIN rail.
Options for 92mm and 120mm fan.
Prints without supports.
Printed in PETG at layer height 0.2mm.
I mountend the Octopus with M3 brass standoffs. Fan Mounts are designed for M3 heat inserts.
The fan mounts have clips to hold the fan in place. I didn't use screws for the fan. The fan mount on the picture is the 92mm version. 120mm fan mount is untested.
DIN Rail Mount is based on the Voron DIN rail clip. (https://github.com/VoronDesign/Voron-2/blob/Voron2.4/STLs/VORON2.4/Electronics_Compartment/DIN_Brackets/pcb_din_clip_x3.stl)
Hardware needed:
- M3 bolts for the Octopus, 8x M3x6 mm
- PCB standoffs brass, 4x M3x10 mm
- M3 heat inserts for mounting the fan, 4x
- M3 bolts for mounting the fan, 4x M3x6 mm