1 / 3
RatRig V-Core 3 IEC Adapter remix
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix of the RatRig V-Core 3 IEC Adapter and Back cover.
- Rating
- 4.833 / 5
- Likes
- 36
- Downloads
- 405
- Makes
- 6
- Views
- 1,744
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Quick remix of https://www.prusaprinters.org/prints/80030-rat-rig-v-core-3-iec-adapter-surface-mount and https://www.prusaprinters.org/prints/82811-back-cover-for-iec-320-power-socket-ratrig to fit the iec-adapter I had ordered.
I added holes for the screws to the iec-adapter and redrew the back cover, becaues it was a bit to small for myiec-adapter.
I only used two of the four holes to mount the front plate to the 3030 extrusions.
Prints without supports.
Printed in PETG at layer height 0.2mm.
Hardware needed:
- M6 bolts and nuts for 3030 extrusion for the surface mount part, 4x
- M3 bolts and nuts for screwing on the back cover, 4x M3x10 mm
- M3 bolts and nuts for screwing on iec-adapter, 2x M3x10 mm