RIS mount for airsoft ELCAN or C79 scope
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A little thing i've made for airsoft use You need M4 screws to tighten it, it keeps zero by friction, feel free to use…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 37
- Makes
- 1
- Views
- 902
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Public Domain
A little thing i've made for airsoft use
You need M4 screws to tighten it, it keeps zero by friction, feel free to use some super glue.
Another M4 screw is placed inside the rail - It will stabilize the ris and make it more sturdy.
If you want you can modify it with the STEP file I attached.
The dimensions were taken from airsoft C79 scope made by g&p.
Print instructions
Print it whenever you want but please do use brimm or raft.
Or just modify it
Material: anything, you can use PLA/ABS/PETG - but the best one would be ABS/ASA or PETG with low cooling. Layer heigh doesn't matter, I printed it witch 0.15 and 0.32mm layers , 0.32 bonded much worse.