1 / 3
PET-BANK | 18650 DIY Powerbank — image 1
1 / 3

PET-BANK | 18650 DIY Powerbank

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

The idea of PET-BANK is to demonstrate that even seemingly useless garbage such as Li-Ion batteries deserve the second…

Rating
0 / 5
Likes
17
Downloads
157
Makes
0
Views
1,741
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution

The idea of PET-BANK is to demonstrate that even seemingly useless garbage such as Li-Ion batteries deserve the second chance. And to make it even better, these were printed out of 100% recycled filament made of old PET bottles. So, Greta, how do you like this? ;-)

Basicaly the only part that is not being recycled here is this powerbank module: https://www.aliexpress.com/item/32914938287.html?spm=a2g0s.9042311.0.0.47f34c4dtfQLdC

Print instructions

Category: Electronics Print Settings

Printer Brand: Anycubic

Printer: Kossel

Rafts: No

Supports: No

Resolution: 0.15 mm

Infill: 10 - 20%

Filament: EKO MB PET Green RePET
Notes:

If you want to go green, you can get some spools of RePET here: https://ekomb.cz/recyklujeme-e-shop/

Post-Printing

1) Assembling the electronics

  • Insert a powerbank module insto the front part of powerbank.
  • solder two extension wires to both sides of an 18650 cell.
  • Insert the cell with attached wires into the powerbank and solder the wires to the powerbank module.
  • secure the cell with some hot silicon from glue gun.

2) Enclosing the powerbank

  • Glue the front cover to the front of the powerbank body using some superglue.
  • Do the same with Top cover.

3) Congrats! You´ve just gave new life to an old garbage! :-)

Duration of Lesson

60 min.

Tags