1 / 4
UHP-200 2020 Extrusion Mount (Voron 2.4/Trident)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mounting bracket to support installing a Meanwell UHP-200-48 (or similar) onto the side extrusions of a Voron printer.
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 26
- Makes
- 0
- Views
- 294
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution
Upgrading my Voron 2.4 350 to 48v, and needed a way to mount an additional 48v power supply. This bracket allows mounting of a UHP-200 in the empty space to the side of the existing 24v power supply. While you can get a mount to run two UHP-200's (24+48) in the space of the original, this saves buying two power supplies and makes use of some wasted space.
You will need the following
- 4x M5x10mm SHCS
- 4x M3x6mm BHCS
- 4x M3x3mm heatset inserts
- 4x M5 T-nuts or similar
I printed in Siddament ABS-GF 0.2mm layer height and 5 walls. Probably overkill though.