Vacuum LocLine 2-1/2" Coupling for Dust Collection
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I wanted an adjustable dust collection solution for my drill press.
- Rating
- 0 / 5
- Likes
- 21
- Downloads
- 122
- Makes
- 0
- Views
- 1,405
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution
I wanted an adjustable dust collection solution for my drill press. This solution uses a 2-1/2" Loc-Line [1] mounted to the drill press with a 14" 2x4 [2]. It joins with a regular 2" shopvac hose via this thing (3D printed coupling).
The coupling fits into Loc-Line very snug, so I recommend using hot air gun for 15-20 seconds to lightly soften the Loc-Line while pushing the coupling in. The inside of the coupling is tapered for the shopvac hose to fit in snug, but is also easily removable.
For reference my shopvac is the Ridgid 4 gal [3] and the hose outside diameter is tapered 44-46mm (~1.75").
- Loc-Line Vacuum Hose Component, Acetal Copolymer, 9 Elements Segment, 2-1/2" Hose ID, 1' Length https://www.amazon.com/Loc-Line-Component-Copolymer-Elements-Segment/dp/B00270GDB6/
- Drill two 2-1/2" holes about 10" apart with hole saw in a 2x4, then cut it in half length-wise. Use 2 bolts to turn it into a clamp. Now you can clamp the drill press and the Loc-Line in place allowing to rotate the Loc-Line around drill press.
- https://www.homedepot.com/p/RIDGID-4-Gal-5-0-Peak-HP-Portable-Wet-Dry-Vacuum-WD4070/202077241
Print instructions
Category: Parts Print Settings
Printer Brand: MK3
Printer: Prusa i3
Rafts: No
Supports: No
Resolution: 0.15
Infill: 70%
Notes:
PLA or ABS