1 / 7
connect 4 / 4 in a row / 4 wins / box travel game toy storage
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
this is a nicely fitting box for storage of a 4 gewinnt game during travel
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 46
- Makes
- 0
- Views
- 359
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Puzzles & Brain-teasers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This storage case contains of two parts.
A bottom box and a top lid.
They slide easily into each other.
It is a replacement for the original paper case that my mother in law is using since many years.
I printed them on my Bambu Lab P1S with the following settings:
Material: PLA Sparkle from Bambu Lab in Crimson Red
Nozzle-Temp: 220°C
Bed-Temp: 55°C
Support: No
Nozzle: 0,4mm
Layer Height: 0,2mm
Infill: 15%
Initial Layer Speed: 50mm/s
Outer Wall Speed: 200mm/s
Inner Wall Speed: 300mm/s
Infill Speed: 250mm/s
Travel Speed: 500mm/s
Fan Speed: 100%