Green Mountain Grill pellet hopper replacement fan blade
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hopper Fan Blade for GMG daniel boone and possibly others
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 22
- Makes
- 0
- Views
- 121
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution
After a while (10 or more years) the fan that positive-pressurizes the pellet hopper can become defective. When that happens, usually due to congealed oil in the fan motor, fire backs up through the pellet feed tube into the hopper because positive pressure in the hopper has been lost. When that happens, the hopper can become very hot - and the plastic OEM fan blade melts, eliminating the ability to create positive pressure.
This model is the fan blade that melted. It works great. The hopper never gets hot - so the plastic fan blade is fine until the hopper pressurization motor seizes up. A little oil fixes that. After cleaning the screen that separates the positive pressure hopper fan from the pellet feed hopper (and the pellets), this little fan blade resurrected my GMG daniel boone and re-enabled good temperature control in the main firebox.
To print, use supports - the fan is thin. Also, sink the model so the Z position is 6mm. That will seat the center body on the bed. The lost blade elements are negligible and the fan still works great.
The hole is 5mm - and that is perfect for the pressure fit onto the knurled spit shaft of the motor (exact fit). It's a little work to get it apart and back together - and you have to be careful there are a lot of little wires. But if you don't want to order a whole new hopper pressurization fan from GMG, you can print your own replacement fan blade and undo the damage.