CCW Claw for Phlster Enigma
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This concealment feature allows the user to offset a claw on the PHLster Enigma by one hole.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 16
- Makes
- 0
- Views
- 188
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
This concealment feature allows the user to offset a claw on the PHLster Enigma by one hole. It works by having three holes and one mounting position:
The top hole is only for screwing a screw into your holster. This is partially responsible for setting your retention.
The middle hole attaches to your Enigma, just like how you'd normally attach your holster to an Enigma. Be sure you have the correct spacers installed.
The bottom hole attaches to your enigma. BE SURE YOU HAVE THE CORRECT MODEL! The 60* spacer version is so that the spacer can be supported on the edge of your holster in the event your holster has a claw mounted to the interior of the holster, like a CYA Ridge. The model with no spacer is for holsters where a claw is mounted externally, like on a Henry Holster Cipher.
I HIGHLY RECOMMEND using a very stiff and very strong filament. What that is for you is up to you. ABS has worked well for me so long as I use a dense fill.