1 / 2
Bar end Bike Bell
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount your RockBros bike bell directly to your bar‑end
- Rating
- 0 / 5
- Likes
- 37
- Downloads
- 56
- Makes
- 0
- Views
- 1,043
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Share Alike
This is a remix of the “A 3D printable bar-end that really works” – with an integrated mount for a bicycle bell.
The bell can either be bought at AliExpress for about €1–4 (link but search for cheapest option yourself) or at Amazon for €12.99 (link).
What you need:
- Mentioned bike bell
- 1x Screw M6 x 25
- 1x Nut M6
- 1x Nut M4 (ideally self locking)
Assembly:
- Disassemble the bell. The original mounting plate is no longer needed.
- Insert a M4 nut into the dedicated opening in the printed part.
- Slide the printed cylinder between the rubber pads of the bell.
- Place the bell dome on top and loosely secure it with the original screw.
- Assemble the three expander parts using a M6 × 25 mm bolt and a matching M6 nut.
- Insert the expander into the handlebar and tighten it.
- Screw the bell holder with the Bell onto the expander.
- Rotate the bell to the desired position and then fully tighten the M4 screw.
Printing:
- Material: PETG recommended
- Bell holder part: 100 % infill
- Supports required bell holder part