1 / 1
Whyte E160 rear mud guards
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
The goal of this design is to protect the suspension linkage bearings from mud, grit, water etc. which reduces their life and keep the bike a little cleaner.
The guards are printed in PETG, and held on with cable ties, I prepared for 6 ties but 4 seems to work.
I think I used supports for the bed only and 15% infill. Note the Whyte logo is upside down in this photo but it is up the correct way in the STL file
