1 / 3
Simple Boxes With Magnetic Closure and flex Hinges
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an easy print with no supports. Hinges are made with Polypropylene in my example, but TPU will work as well.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 23
- Makes
- 0
- Views
- 185
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
Split to objects and print hinges separately using PP or TPU. Use a brim on hinges. Set top and bottom surfaces to Octagram spiral to achieve the star effect shown in photos.
Approximate sizes:
SMALL Box= 150mm x 75mm
MEDIUM Box= 200mm x 100mm
LARGE Box= 250mm x 150mm
All boxes require two 5mmx3mm magnets. One glued into each hole in the front latch area