RPi4 with UPS Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I could not find any RPI cases that also housed the UPS, so I designed my own. There are no internal screws to fix the…
- Rating
- 4 / 5
- Likes
- 3
- Downloads
- 39
- Makes
- 1
- Views
- 547
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I could not find any RPI cases that also housed the UPS, so I designed my own.
There are no internal screws to fix the RPi or UPS as it all sandwiches together. The RPi and UPS mounting holes align and seat nicely on locating nipples.
Houses a 40mm fan.
I have designed this using a '18650 UPS With RTC' see picture. Do a search on Aliexpress to find it.
Top and bottom parts are printed in PLA+ with the middle section printed in clear PETG to see the LEDs. However you can print it in whatever you want.
Recommended tree supports for the bottom and middle parts as there is some bridging required.
BOM
4x M3 x 45 SHSC
4x M3 inserts
I may add a 5" screen housing in the future but currently the screen is not a necessity.
Category: Other