HexaGlow - 3D Printed hexagonal e27 Lamp

Printer: Used Settings on the Bambu A1 Mini

Nozzle Size: 0.2 mm

Shade

Layer hight: 0,2 mm

Material: Landu PETG White

Temp: 240 °C

Bed Temp: 75 °C (first Layer 80 °C)

Base

Material:  PLA Matte 

Layer hight: 0,16 mm

Bottom Layers: 2 mm 

Walls: 3 (2 were not testet but coud be enough)

Infill: 5 % Gyroid

Shade

Wall Generator: Arachne

Wall Thickness: StandardWalls: 2

Bottom Layers: 3

Print Speed

Outer Walls: 100 mm/s

Inner Walls: 120 mm/s

Fuzzy Skin Settings (for both)

Fuzzy Skin: Enabled (Contour only)

Fuzzy Skin Noise Type: Voronoi

Point Distance: 0.5 mm

Strength: 0.2 mm

Feature Size: 1.4 mm

Estimated Print Time & Filament Usage

Shade

Print Time: ~3 hours 50 minutes

Filament Usage: 82 g

Base

Print Time: ~5 hours 40 minutes

Filament Usage: 170 g

Remove the fuzzy Skin in the lamp socket with a modifire

Lighting Setup

This lamp is designed to be used with:

A standard E27 renovation socket (E27 retrofit fitting)

Socket Dimensions (for fitting into lamp)

Outer Diameter: approx. 38 mm

Height: approx. 42 mm (if part of the cable guide is removed)

A smart LED bulb recommendet

(Desinged for https://amzn.eu/d/cAQPfQO -  Others with similar dimensions should fit as well)

⚠ Note: Make sure the bulb stays cool and does not exceed typical LED wattage (max ~10 W recommended).

The lamp is designed for indoor decorative use only.Size:

Hight: ~ 220 mm

Diameter: ~ 140 mm