Logitech K400+ Battery Cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement battery cover for the Logitech K400 Plus wireless keyboard (different from the K400 non-plus).
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 172
- Makes
- 1
- Views
- 490
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Share Alike
Logitech K400+ Battery Cover
The cover of the K400 plus and non-plus are different and I couldn't find any models for this specific one. Seemed like a good beginner FreeCAD project, then I realized this thing has literally just one non-curved surface…
Print instructions
This is meant to be printed with a slightly flexible filament - PETG recommended. PLA may work, but the front hooks are pretty flimsy and may have a lower life.
The model is easiest to print on the flat back surface, though this means the mounting hooks print in the weakest layer orientation. In this orientation the print requires no support structures. It appears to work for me, but if you want to take your life in your hands you can try printing it standing on the side (with a lot of supports and a brim).
- Material: PETG
- Resolution: 0.006 recommended
- Nozzle: 0.4mm
- Layer height: 0.12mm
- Wall loops: 3