lightsaber chassis
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
this is a custom lightsaber chassis i made for my lightsaber hilt.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 44
- Makes
- 0
- Views
- 280
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
this is a custom lightsaber chassis i made for my lightsaber hilt.
this chassis is made for a little bit smaller lightsabers
it may require some sanding for different parts
this chassis supports:
- 18650 3.7 V battery
- a round recharge port
- a 14mm round button (momentary)
- a proffieboard (not CFX)
- a kill switch
- and places for the battery tabs
- speaker (i dont know what size but i recommend 24mm or less)
- neopixel pcb hilt side (i am going to use the short pin, but you can use long pin if u want)
these are the print times (on my crappy old ender 3 pro):
pcb holder: 3 minutes
chassis: 3 hours and 12 minutes
[WARNING: THIS LIGHTSABER CHASSIS DOES NOT USE THE NORMAL SPACINGS BETWEEN THE BUTTON/CHARGE PORT, THE SPACINGS ARE A LITTLE BIT BIGGER FOR MY CUSTOM LIGHTSABER HILT. I AM MAYBE GOING TO ADD A NORMAL SPACINGS ONE, BUT FOR NOW: BE AWARE]
:)
PS. if there are any flaws, please contact me